FALL FRAME PREVIEW

Check out some of the new frame options coming in October…

Comb
Jeff Wescott Signature

Top Tube: 20.6”, 20.8” and 21.1”

Head Tube: 75 degrees | BB Height: 11.8” | Seat Tube: 71 degrees | Standover Height: 9” | Chain Stay Length 13” – 13.6” | Weight 5.1lbs

“420 BAKED” Heat -treated Offset Thickness Head Tube | 125mm Taller Head Tube | 4130 Cromoly Seat Clamp with 6mm bolt and horizontal clamp slot on seat tube to give better clamping power with less torque | 6mm Dropouts with integrated chain adjusters

Brake Hardware Not Included | Included with each frame is the chain tensioner hardware and a sticker pack

Colors: Trans Yellow and Trans Black.

Post Matt Roe, based on the geometry from Roey’s long running signature frame the Conjurer. As some of you know, Roey is currently focussed on other interests. However since we stopped offering his frame, a lot of our long term customers have wanted to buy a new frame but nothing we currently offered compared to the Conjurer. After speaking with Roey, we got his blessing on the project and thus the PMR was born. We’re only going to offer these on this pre-book.

Top Tube: 20.5”, 20.75” and 21”

Head Tube: 74.5 degrees | BB Height: 11.8” | Seat Tube: 70 degrees | Standover Height: 8.6” | Chain Stay Length 13.25” – 13.7” | Weight 5.1lbs

“420 BAKED” Heat -treated Offset Thickness Head Tube | 117mm Taller Head Tube | 4130 Cromoly Seat Clamp with 6mm bolt and horizontal clamp slot on seat tube to give better clamping power with less torque | 6mm Dropouts with integrated chain adjusters

Brake Hardware Not Included | Included with each frame is the chain tensioner hardware, a sticker pack and a Conjurer sticker set

Colors: Trans Purple and Trans Blue